Infusion Warmer with Tube Size 3 to 5 mm
In stock
Share this product
Infusion Warmer with Tube Size 3 to 5 mm
The Infusion Warmer with Tube Size 3 to 5 mm is designed for controlled warming of blood, saline and compatible intravenous fluids before or during administration in hospitals, emergency departments, operation theatres, ICUs and other professional clinical environments. Its compact design and simple digital controls make it suitable for situations where warmed fluids are required under medical supervision.
The device is designed to maintain fluid temperature around 37°C ± 1°C, helping healthcare staff deliver warmed blood or infusion fluids according to clinical requirements. It is compatible with tubing sizes from approximately 3 mm to 5 mm, making it suitable for commonly used compatible infusion lines.
Built-in safety functions such as over-temperature protection, automatic temperature control and audible alarms support safer operation. In addition, its lightweight construction, clear digital display and fast warming time make it practical for routine transfusion, emergency and critical-care use.
Key Features
- Precise Temperature Control: Maintains the warming temperature at approximately 37°C ± 1°C for compatible blood and infusion fluids.
- 3–5 mm Tube Compatibility: Designed for compatible infusion tubing with an approximate diameter of 3 mm to 5 mm.
- Fast Warming Performance: Typical warming time is approximately 3–5 minutes for standard fluid volumes, as provided.
- Digital Temperature Display: Clear display provides real-time visibility of the selected and working temperature.
- User-Friendly Controls: Simple buttons allow convenient temperature adjustment, start/stop operation and alarm muting.
- Over-Temperature Protection: Designed to reduce the risk of excessive fluid warming through automatic safety control.
- Audible Alarm System: Provides alerts for selected conditions such as over-temperature and low-flow situations.
- Compact & Portable: Lightweight design supports convenient use in emergency, OT and bedside environments.
- Wide Fluid Compatibility: Suitable for warming compatible blood, saline and other intravenous fluids used in patient care.
Clinical Applications
| Application Area | Use |
|---|---|
| Blood Transfusion | Supports warming of compatible blood products according to clinical protocol. |
| IV Fluid Administration | Can be used to warm compatible saline and intravenous fluids before delivery. |
| Operation Theatre | Supports warmed-fluid administration during selected surgical procedures. |
| Emergency Care | Portable design supports rapid deployment in emergency and trauma situations. |
| ICU / Critical Care | Suitable for selected critical-care infusion and transfusion workflows. |
Technical Specifications
| Specification | Details |
|---|---|
| Product Name | Infusion Warmer with Tube Size 3 to 5 mm |
| Product Type | Blood & Infusion Fluid Warmer |
| Compatible Tube Size | Approx. 3 mm to 5 mm |
| Temperature Setting | Approx. 37°C ± 1°C |
| Typical Warming Time | Approx. 3–5 Minutes |
| Display Type | Digital Temperature Display |
| Alarm System | Over-Temperature and Low-Flow Alarms |
| Safety Protection | Automatic Temperature Cut-Off / Over-Temperature Protection |
| Power Supply | 220–240 V AC, 50/60 Hz |
| Material | Medical-Grade Plastic and Stainless Steel |
| Approx. Dimensions | 18 × 7 × 3.5 cm |
| Approx. Weight | 0.4 kg |
| Primary Application | Warming of Compatible Blood and Intravenous Fluids |
Benefits
- Supports controlled warming of blood and compatible IV fluids before administration.
- Helps maintain fluid temperature around the specified 37°C range.
- Fast warming time supports efficient use in emergency and surgical settings.
- Compact design makes the unit suitable for bedside and mobile clinical use.
- Audible alarms help staff respond to over-temperature or low-flow conditions.
- Automatic temperature protection supports safer warming operation.
- Simple interface reduces setup time during routine clinical workflows.
- Lightweight 0.4 kg construction makes handling and placement convenient.
Suitable For
- Hospitals
- Operation theatres
- Emergency departments
- ICUs
- Trauma centres
- Critical care units
- Blood transfusion areas
- Ambulance and mobile medical setups, where clinically appropriate
How to Use
- Place the infusion warmer on a stable and dry clinical surface.
- Check the power connection, display and tube slot before use.
- Select a compatible infusion tube within the specified 3–5 mm size range.
- Position the infusion tubing correctly through the warming channel according to the device instructions.
- Switch on the warmer and set the prescribed temperature according to clinical protocol.
- Allow the device to reach the required operating temperature.
- Monitor the temperature display and infusion flow during use.
- Respond immediately to any over-temperature, low-flow or other alarm condition.
- After use, switch off the device and remove the tubing carefully.
- Clean the exterior according to hospital infection-control and manufacturer instructions.
Why Choose This Infusion Warmer?
The Infusion Warmer with Tube Size 3 to 5 mm provides a compact solution for healthcare environments that require controlled warming of blood and compatible intravenous fluids. Its specified temperature control of approximately 37°C ± 1°C supports consistent warming, while the digital display allows staff to monitor the operating temperature in real time.
The combination of over-temperature protection, low-flow alarms, fast warming performance and portable construction makes the device practical for operation theatres, emergency departments, critical-care areas and transfusion workflows. Its compatibility with 3–5 mm tubing also supports use with a range of suitable clinical infusion lines.
Why Choose Medansh?
Medansh offers infusion warmers, syringe pumps, infusion pumps and other critical-care equipment for hospitals, operation theatres, ICUs and institutional healthcare buyers. Buyers can explore suitable infusion and patient-care products on Medansh.in according to clinical requirements, facility setup and budget.
Important Note: This device is intended for professional medical use by trained healthcare personnel. Fluid type, tubing compatibility, target temperature and warming procedure must follow the medical order, institutional protocol and manufacturer instructions. The supplied material states a target temperature of 37°C ± 1°C and a typical warming time of 3–5 minutes; actual performance may vary with fluid volume, flow rate and starting temperature.
Frequently Asked Questions
What is the Infusion Warmer used for?
It is designed to warm compatible blood, saline and other intravenous fluids before or during administration.
What tube size is compatible?
The product is designed for compatible tubing approximately 3 mm to 5 mm in diameter.
What temperature does it maintain?
The supplied specification lists approximately 37°C ± 1°C.
How long does warming take?
The typical warming time is listed as approximately 3–5 minutes for standard fluid volumes.
Does it have over-temperature protection?
Yes. Automatic temperature cut-off and over-temperature protection are listed among the safety functions.
Does the device provide alarms?
Yes. Over-temperature and low-flow alarms are listed.
What power supply is required?
The device supports 220–240 V AC at 50/60 Hz.
What are the approximate dimensions and weight?
The supplied specifications list approximately 18 × 7 × 3.5 cm and a weight of around 0.4 kg.
Where can this infusion warmer be used?
It is suitable for hospitals, operation theatres, emergency departments, ICUs, trauma centres and blood-transfusion areas.
